Packaging Supply Store in Bangalore

Can we help? 07483994577 Mon-Sat 9:30am-6pm / Buying in bulk? FREE no obligation quotes.

Pneumatic Paste Filling Machine 250 ml

Pneumatic paste filling machine measure and dispense free flowing products - such as thin and/or moderately dense liquids - onto a container. Each machine is equipped with one or more volumetric pistons. Each fill/release cycle consists of an intake stroke, where the product is withdrawn from the container or hopper and taken into the product cylinder. The down stroke commences as soon as the product cylinder has reached its predetermined fill level. The piston pushes the product out of the cylinder and into the container.

The amount of product to dispense is set by a simple adjustment of the length of the piston stroke (the distance covered by the piston). The adjustment is performed by turning an small adjusting wheel located at table-top level. If the stroke is reduced the volume of dispensed product decreases. On the other hand, lengthening the piston stroke will result more product being dispensed. Once the set, the pneumatic filler will dispense accurately and repeatedly. Two repeated cycles can be performed to fill volumes that are higher than the cylinder capacity.

Our volumetric pneumatic fillers are used by industries in the Food & Beverage, Cosmetics, Personal Care, Agricultural, Animal Care, Pharmaceutical, and Chemical fields.

Features

  • Filling Range: 1.014 - 8.453 oz. (30 -250 ml)
  • Approximate Speed: 20 - 25 pcs/min(depending on operator speed, product density, draw length, a fill speed, among others)
  • Suitable to fill low to high-density liquids (1,000 - 10,000 cp)
  • All Parts in Contact with Product are Food Grade (SS 316)
  • Stainless Steel Construction
  • Rugged Rotary Valve System Design
  • Electro-pneumatic operation
  • Fluoropolymer elastomer O-ring System
  • Adjustable Volumetric Piston System with Numeric Reference Display
  • Piston Feed Speed Adjustment
  • No-drip Option Included and Installed
  • Extremely Accurate (+/- 1%)
  • Extremely Easy to Clean and Maintain
  • Sanitary Stainless Steel Quick Disconnect Fittings
  • Extremely Easy to Operate
  • Quick Connect/Disconnect Pneumatic Fittings.

Control Panel

  • Master Start/Stop
  • Cycle Reset Button
  • Semi Auto/Continuous Operation Selector Switch
  • Air Pressure Gauge
  • Air Intake Pressure Adjustment
  • Piston Volume Adjust with Numeric Display

Other Specifications

  • Includes Electro-mechanic Industrial Duty Pedal
  • Includes Parts kit
  • Not to be Used to Dispense Flammable or Explosive Products
  • Nozzle Type: Type A
  • Machine Size: 36 inches x 12 inches x 27 inches
  • Stock Nozzle Tip dimensions:14mm Outside Diameter x12mm Inside Diameterx16mm Length (0.55in ODx0.47in IDx0.63in L)
  • Air Requirements: 4 CFM/min (114 lts/min) @ 90 PSI (6.2 Bar) (Air compressor not included) (Min. Req. Air Compressor: 25 Gal)

Products we can recommend to you...


Paste Filling Machine 50 Ml
Paste Filling Machine

Paste Filling Machine (50 Ml)

Paste Filling Machine 100 Ml
Paste Filling Machine

Paste Filling Machine (100 Ml)

Paste Filling Machine 250 Ml
Paste Filling Machine

Paste Filling Machine (250 Ml)

Paste Filling Machine 500 Ml
Paste Filling Machine

Paste Filling Machine (500 Ml)

Paste Filling Machine 1000 Ml
Paste Filling Machine

Paste Filling Machine (1000 Ml)

Paste Filling Machine 5000 Ml
Paste Filling Machine

Paste Filling Machine (5000 Ml)